70462 Iveco Eurotech / Cargo 92-

Step 1:    Unclip the small square plastic plate in the upper right corner of the dashboard. Also unclip the small blanking plate some 150mm beneath.

Step 2:    Loosen the screws behind each of these panels.

Step 3:    Remove the protective foil on the dual sided tape.

Step 4:    Lever out the top right of the upper panel and locate the bracket with this screw.

Step 5:    Tighten the screws fully and refit the two plastic panels.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket