70527 CHEVROLET S10 BLAZER 97>

Step 1:     Start by removing the 2 bolts securing the panel under the steering column. Push this one slightly down in front and remove the 2 bolts in the dashboard mouldings lower edge. Remove the bolt above the instrument cluster. Pull the panel out and disconnect the wires. (Panel held by clips)

Step 2:     On the right hand side of the radio you will find a bolt on which the Dash Mount is installed. Slide the dashboard panel‘s right side in behind the Dash Mount from the right and then reconnect the wires.

Step 3:     Clip the panel into position and reinstall the bolts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket