70517 VW Beetle LHD 99>

Step 1: Unclip the U-shaped plastic cover on the left side of passenger grab-bar

Step 2: Remove the Torx screw and pull the bar as far out as possible.

Step 3: Enter the 2 fingers behind the base for the bar. Push your bracket as far up as possible. The lower arm with the hook is pushed into the gap between the black center console and the main dashboard.

Step 4: Push bar into position and enter the screw. Tighten properly. Clip the cover back into position.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket